| a) Water Based Paints and Pigments |
| IS 427 : 2013 Specification for distemper, dry, colour as required (third revision) |
| IS 428 : 2013 Specification for washable distemper (third revision) |
| IS 5410 : 2013 Specification for cement paint (second revision) |
| IS 15489 : 2013 Specification for paint, plastic emulsion (first revision) |
| b) Ready Mixed Paints, Enamels and Powder Coatings |
| IS 101 Methods of sampling and test for paints, varnishes and related products |
| (Part 1/Sec 1) :1986 Test on liquid paints (general and (general and physical), Section 1 Sampling (third revision) |
| (Part 1/Sec 2) :1987 Test on liquid paints (general and physical), Section 2 Preliminary examination and preparation of samples for testing (third revision) |
| (Part 1/Sec 3) :1986 Test on liquid paints (general and physical), Section 3 Preparation of panels (third revision) |
| (Part 1/Sec 4) :1987 Test on liquid paints (general and physical), Section 4 Brushing test (third revision) |
| (Part 1/Sec 5) :1989 Test on liquid paints (general and physical), Section 5 Consistency (third revision) |
| (Part 1/Sec 6) :1987 Test on liquid paints (general and physical), Section 6 Flash point (third revision) |
| (Part 1/Sec 7) :1987 Test on liquid paints (general and physical), Section 7 Mass per 10 litres (third revision) |
| (Part 2/Sec 1) :1988 Test on liquid paints (Chemical examination), Section 1 Water content (third revision) |
| (Part 2/Sec 2) :1986 Test on liquid paints (Chemical examination), Section 2 Volatile matter (third revision) |
| (Part 3/Sec 1) :1986 Tests on paint film formation, Section 1 Drying time (third revision) |
| (Part 3/Sec 2) :1989 Tests on paint film formation, Section 2 Film thickness (third revision) |
| Part 3/Sec 4) :1987 Tests on paint film formation, Section 4 Finish (third revision) |
| (Part 3/Sec 5) :1987 Tests on paint film formation, Section 5 Fineness of grind (third revision) |
| (Part 4/Sec 1) :1988 Optical test, Section 1 Opacity (third revision) |
| (Part 4/Sec 2) :1989 Optical test, Section 2 Colour (third revision) |
| (Part 4/Sec 3) :1988 Optical test, Section 3 Light fastness test (third revision) |
| (Part 4/Sec 4) :1988 Optical test, Section 4 Gloss (third revision) |
| (Part 5/Sec 1) :1988 Mechanical test on paint films, Section 1 Hardness tests (third revision) |
| (Part 5/Sec 2) :1988 Mechanical test on paint films, Section 2 Flexibility and adhesion (third revision) |
| (Part 5/Sec 3) :1999 Mechanical test on paint films, Section 3 Impact resistance (fourth revision) |
| (Part 5/Sec 4) :1988 Mechanical test on paint films, Section 4 Print free test (third revision) |
| (Part 6/Sec 1) :1988 Durability tests, Section 1 Resistance to humidity under conditions of condensation (third revision) |
| (Part 6/Sec 2) :1989 Durability tests, Section 2 Keeping properties (third revision) |
| (Part 6/Sec 3) :1990 Durability tests, Section 3 Moisture vapour permeability (third revision) |
| (Part 6/Sec 4) :1991 Durability tests, Section 4 Degradation of coatings (pictorial aids for evaluation) (third revision) |
| (Part 6/Sec 5) :1997 Durability tests, Section 5 Accelerated weathering test |
| (Part 7/Sec 1) :1989 Environmental tests on paint films, Section 1 Resistance to water (third revision) |
| (Part 7/Sec 2) :1989 Environmental tests on paint films, Section 2 Resistance to liquids (third revision) |
| (Part 7/Sec 3) :1990 Environmental tests on paint films, Section 3 Resistance to heat (third revision) |
| (Part 7/Sec 4) :1990 Environmental tests on paint films, Section 4 Resistance to bleeding of pigments (third revision) |
| (Part 8/Sec 1) :1989 Tests for pigments and other solids, Section 1 Residue on sieve (third revision) |
| (Part 8/Sec 2) :1990 Tests for pigments and other solids, Section 2 Pigments and non – volatile matter (third revision) |
| (Part 8/Sec 3) :1993 Tests for pigments and other solids, Section 3 Ash content (third revision) |
| (Part 8/Sec 4) :2015 Tests for pigments and other solids, Section 4 Phthalic anhydride (fourth revision) |
| (Part 8/Sec 5) :1993 Tests for pigments and other solids, Section 5 Lead restriction test (third revision) |
| (Part 8/Sec 6) :1993 Tests for pigments and other solids, Section 6 Volume solids |
| (Part 9/Sec 1) :1993 Tests for lacquers and varnish, Section 1 Acid value (third revision) |
| (Part 9/Sec 2) :1993 Tests for lacquers and varnish, Section 2 Rosin test (third revision) |
| IS 104 : 1979 Specification for ready mixed paint, brushing, zinc chrome, priming (second revision) |
| IS 109 : 1968 Specification for ready mixed paint, brushing, priming, plaster to Indian Standard colours No. 361 and 631 (first revision) |
| IS 133 : 2004 Specification for enamel, interior (a) undercoating, (b) finishing (fourth revision) |
| IS 133 (Part 1) :2013 Specification for enamel, interior (a) undercoating, (b) finishing : Part 1 For household and decorative purposes (fifth revision) |
| IS 137 : 1965 Specification for ready mixed paint, brushing, matt or egg-shell flat, finishing, interior, to Indian Standard colour, as required (revised) |
| IS 158 : 2015 Specification for ready mixed paint, brushing, bituminous, black, lead- free, acid, alkali, and heat resisting (fourth revision) |
| IS 164 : 1981 Specification for ready mixed paint for road marking (second revision) |
| IS 168 : 1993 Specification for ready mixed paint, air-drying semi-glossy/matt, for general purposes (third revision) |
| IS 341 : 1973 Specification for black Japan, Types A, B and C (first revision) |
| IS 2074 : 1992 Specification for ready mixed paint, air drying red oxide-zinc chrome, priming (second revision) |
| IS 2075 : 2000 Specification for ready mixed paint, stoving, red oxide-zinc chrome, priming (second revision) |
| IS 2339 : 2013 Specification for aluminium paint for general purposes (first revision) |
| IS 2932 (Part 1) :2013 Specification for enamel, synthetic, exterior (a) undercoating, (b) finishing: Part 1 For household and decorative applications (fourth revision) |
| IS 2933 (Part 1) :2013 Specification for enamel, exterior: (a) undercoating (b) finishing: Part 1 for domesic and decorative applications |
| IS 3536 : 1999 Specification for ready mixed paint, brushing, wood primer (first revision) |
| IS 3537 : 1966 Specification for ready mixed paint, finishing, interior for general purposes, to Indian Standard colours No. 101, 216, 217, 219, 275, 281, 352, 353, 358 to 361, 363, 364, 388,410, 442, 444, 628, 631, 632, 634, 693, 697, white and black |
| IS 3539 : 1966 Specification for ready mixed paint, undercoating, for use under oil finishes, to Indian Standard colours, as required |
| IS 3585 : 1966 Specification for ready mixed paint, aluminium, brushing, priming, water resistant, for wood work |
| IS 3678 : 1966 Specification for ready mixed paint, thick white, for lettering |
| IS 9862 : 1981 Specification for ready mixed paint, brushing, bituminous black lead free, acid, alkali, water and chlorine resisting |
| IS 11883 : 1986 Specification for ready mixed paint, brushing, red oxide, priming for metals |
| IS 12744 (Part 1) :2013 Specification for ready mixed paint, air drying, red oxide, zinc phosphate, priming: Part 1 for domestic and decorative applications (fourth revision) |
| IS 13183 : 1991 Specification for aluminium paints, heat resistant |
| IS 13213 : 1991 Specification for polyurethane full gloss enamel (two pack) |
| IS 13607 : 1992 Specification for ready mixed paint, finishing, general purposes, synthetic |
| IS 13871 : 1993 Specification for powder coatings |
| IS 14506 : 1998 Specification for epoxy redoxide zinc phosphate weldable primer, two component |
| IS 14589 : 1999 Specification for zinc priming paint, epoxy based, two pack |
| c) Thinners and Solvents |
| IS 82 : 1973 Methods of sampling and test for thinners and solvents for paints (first revision) |
| IS 430 : 1972 Paint remover, solvent type, non- flammable (second revision) |
| IS 431 : 1972 Paint remover, solvent type, flammable (second revision) |
| IS 533 : 2007 Specification for gum spirit of turpentine (oil of turpentine) (third revision) |
| IS 5667 : 1970 Specification for thinner for cellulose nitrate based paints and lacquers |
| IS 14314 : 1995 Specification for thinner general purposes for synthetic paints and varnishes |
| d) Varnishes and Lacquers |
| IS 337 : 1975 Specification for varnish, finishing, interior (first revision) |
| IS 344 : 1976 Specification for varnish, stoving (first revision) |
| IS 347 : 1975 Specification for varnish, shellac, for general purposes (first revision) |
| IS 348 : 1968 Specification for French polish (first revision) |
| IS 524 : 1983 Specification for varnish, finishing, exterior, synthetic (second revision) |
| IS 525 : 1968 Specification for varnish, finishing, exterior and general purposes (first revision) |
| IS 642 : 1963 Specification for varnish medium for aluminium paint (revised) |
| IS 10018 : 1981 Specification for lacquer, cellulose, nitrate clear, finishing, glossy for wood |
LIST OF INDIAN CODE BOOKS RELATED TO PAINTS AND ALLIED PRODUCTS
July 15, 2019
