| a) General |
| IS 782 : 1978 Specification for caulking lead (third revision) |
| IS 804 : 1967 Specification for rectangular pressed steel tanks (first revision) |
| IS 1726 : 1991 Specification for cast iron manhole covers and frames (third revision) |
| IS 2963 : 2013 Specification for copper alloy waste fittings and waste plug for wash- basins and sinks (second revision) |
| IS 5219 : 2013 Specification for cast copper alloy traps (first revision) |
| IS 5455 : 1969 Specification for cast-iron steps for manholes |
| IS 5961 : 1970 Specification for cast iron gratings for drainage purposes |
| IS 9140 : 1996 Method of sampling of vitreous and fire clay sanitary appliances (second revision) |
| IS 9872 : 1981 Specification for precast concrete septic tanks |
| IS 12592 : 2002 Specification for precast concrete manhole covers and frames (first revision) |
| IS 12701 : 1996 Specification for rotational moulded polyethylene water storage tanks (first revision) |
| IS 13356 : 1992 Specification for precast ferrocement water tanks (250 to 10 000 litres capacity) |
| IS 14399 Hot press moulded thermosetting glass fibre reinforced (GRP) sectional water storage tanks |
| (Part 1) : 1996 Specification for panels |
| (Part 2) : 1996 Guidelines for assembly, installation and testing |
| b) Pipes and Fittings excluding valves |
| i) Brass and Copper Pipes and Fittings |
| IS 407 : 1981 Specification for brass tubes for general purposes (third revision) |
| IS 2501 : 1995 Specification for solid drawn copper tubes for general engineering purposes (third revision) |
| ii) Cast Iron Pipes and Fittings |
| IS 1536 : 2001 Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage (fourth revision) |
| IS 1537 : 1976 Specification for vertically cast iron pressure pipes for water, gas and sewage (first revision) |
| IS 1538 : 1993 Specification for cast iron fittings for pressure pipes for water, gas and sewage (third revision) |
| IS 1729 : 2002 Cast iron/ductile iron drainage pipes and pipe fittings for over ground non- pressure pipeline socket and spigot series (second revision) |
| IS 1879 : 2010 Specification for malleable cast iron pipe fittings (third revision) |
| IS 3989: 2009 Specification for centrifugally cast (spun) iron spigot and socket soil, waste and ventilating pipes, fittings and accessories (third revision) |
| IS 5531: 2014 Specification for cast iron specials for asbestos-cement pressure pipes for water, gas and sewage (third revision) |
| IS 6418 : 1971 Specification for cast iron and malleable cast iron flanges for general engineering purposes |
| IS 7181 : 1986 Specification for horizontally cast iron double flanged pipes for water, gas and sewage (first revision) |
| IS 8329 : 2000 Specification for centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage (third revision) |
| IS 8794 : 1988 Specification for cast iron detachable joints for use with asbestos cement pressure pipes (first revision) |
| IS 9523 : 2000 Specification for ductile iron fittings for pressure pipes for water, gas and sewage (first revision) |
| IS 10292 : 1988 Dimensional requirements for rubber sealing rings for C.I.D. Joints in asbestos cement piping (first revision) |
| IS 10299 : 1982 Cast iron saddle pieces for service connection from asbestos cement pressure pipes |
| IS 11606 : 1986 Methods of sampling cast iron pipes and fittings |
| IS 12820 : 2004 Dimensional requirements of rubber gaskets for mechanical joints and push-on joints for use with cast iron pipes and fittings for carrying water, gas and sewage (first revision) |
| IS 12987 : 1991 Cast iron detachable joints for use with asbestos cement pressure pipes (light duty) |
| IS 12988 : 1991 Rubber sealing rings for CID joints for light duty AC pipes – Dimensional requirements |
| IS 13382 : 2004 Specification for cast iron specials for mechanical and push-on flexible joints for pressure pipelines for water, gas and sewage (first revision) |
| IS 15905 : 2011 Specification for hubless centrifugally cast (spun) iron pipes, fittings and accessories – Spigot series |
| iii) Lead Pipes and Fittings |
| IS 404 (Part 1) : 1993 Specification for lead pipes: Part 1 For other than chemical purpose (third revision) |
| iv) Fibre Pipes and Fittings |
| IS 11925 : 1986 Specification for pitch-impregnated fibre pipes and fittings for drainage purposes |
| v) Plastic Pipes and Fittings |
| IS 4984 : 1995 Specification for high density polyethylene pipes for water supply (fourth revision) |
| IS 4985 : 2000 Specification for unplasticized PVC pipes for potable water supplies (third revision) |
| IS 7834 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies |
| (Part 1) : 1987 General requirements (first revision) |
| (Part 2) : 1987 Specific requirements for 45° elbows (first revision) |
| (Part 3) : 1987 Specific requirements for 90° elbows (first revision) |
| (Part 4) : 1987 Specific requirements for 90° tees (first revision) |
| (Part 5) : 1987 Specific requirements for 45° tees (first revision) |
| (Part 6) : 1987 Specific requirements for sockets (first revision) |
| (Part 7) : 1987 Specific requirements for unions (first revision) |
| (Part 8) : 1987 Specific requirements for caps (first revision) |
| IS 8008 Specification for injection moulded high density polyethylene (HDPE) fittings for potable water supplies |
| (Part 1) : 2003 General requirements |
| (Part 2) : 2003 Specific requirements for 90° bends (first revision) |
| (Part 3) : 2003 Specific requirements for 90° tees |
| (Part 4) : 2003 Specific requirements for reducers |
| (Part 5) : 2003 Specific requirements for ferrule reducers (first revision) |
| (Part 6) : 2003 Specific requirements for pipe ends |
| (Part 7) : 2003 Specific requirements for sandwich flanges |
| (Part 8) : 2003 Specific requirements for reducing tests |
| (Part 9) : 2003 Specific requirements for end caps (first revision) |
| IS 8360 Specification for fabricated high density polyethelene (HDPE) fittings for potable water supplies |
| (Part 1) : 1977 General requirements |
| (Part 2) : 1977 Specific requirements for 90° tees |
| (Part 3) : 1977 Specific requirements for 90° bends |
| IS 10124 Specification for fabricated PVC-U fittings for potable water supplies |
| (Part 1) : 2009 General requirements (second revision) |
| (Part 2) : 2009 Specific requirements for sockets (second revision) |
| (Part 3) : 2009 Specific requirements of straight reducers (second revision) |
| (Part 4) : 2009 Specific requirements for caps (second revision) |
| (Part 5) : 2009 Specific requirements for equal tees (second revision) |
| (Part 6) : 2009 Specific requirements for flanged tail piece with metallic flanges (second revision) |
| (Part 7) : 2009 Specific requirements for threaded adaptors (second revision) |
| (Part 8) : 2009 Specific requirements for 90° bends (second revision) |
| (Part 9) : 2009 Specific requirements for 60° bends (second revision) |
| (Part 10) : 2009 Specific requirements for 45° bends (second revision) |
| (Part 11) : 2009 Specific requirements for 30° bends (second revision) |
| (Part 12) : 2009 Specific requirements for 22½° bends (second revision) |
| (Part 13) : 2009 Specific requirements for 11¼° bends (second revision) |
| IS 12235 Methods of test for unplasticised PVC pipes for potable water supplies |
| (Part 1) : 2004 Measurement of dimensions (first revision) |
| (Part 2) : 2004 Determination of Vicat softening temperature (first revision) |
| (Part 3) : 2004 Test for opacity (first revision) |
| (Part 4) : 2004 Determining the detrimental effect on the composition of water (first revision) |
| (Part 5/Sec 1) : Longitudinal reversion, Section 1 2004 Determination methods (first revision) |
| (Part 5/Sec 2) : Reversion test, Section 2 2004 Determination parameters (first revision) |
| (Part 6) : 2004 Stress relief test (first revision) |
| (Part 7) : 2004 Resistance to sulphuric acid (first revision) |
| (Part 8/Sec 1) : Resistance to internal hydrostatic 2004 pressure, Section 1 Resistance to internal hydrostatic pressure at constant internal water pressure (first revision) |
| (Part 8/Sec 2) : Resistance to internal hydrostatic 2004 pressure, Section 2 Leak-tightness of elastomeric sealing ring type socket joints under positive internal pressure and with angular deflection (first revision) |
| (Part 8/Sec 3) : Resistance to internal hydrostatic 2004 pressure, Section 3 Leak-tightness of elastomeric sealing ring type socket joints under negative internal pressure and with angular deflection (first revision) |
| (Part 8/Sec 4) : Resistance to internal hydrostatic 2004 pressure, Section 4 Leak-tightness of elastomeric sealing ring type socket joints under positive internal pressure without angular deflection (first revision) |
| (Part 9) : Resistance to external blows (impact 2004 resistance) at 0°C (Round-the-clock method) |
| (Part 10) : 2004 Determination of organotin as tin aqueous solution (first revision) |
| (Part 11) : 2004 Resistance to dichloromethane at specified temperature (first revision) |
| (Part 12) : 2004 Determination of titanium dioxide content |
| (Part 13) : 2004 Determination of tensile strength and elongation |
| (Part 14) : 2004 Determination of density/relative density (specific gravity) |
| (Part 15) : 2004 Determination of vinyl chloride monomer content |
| (Part 16) : 2004 High temperature test |
| (Part 17) : 2004 Determination of ash content and sulphated ash content |
| (Part 18) : 2004 Determination of ring stiffness |
| (Part 19) : 2004 Flattening test |
| IS 12709 : 1994 Specification for glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for potable water supply (first revision) |
| IS 12818 : 2010 Specification for unplasticized polyvinyl chloride(PVC-U) screen and casing pipes for bore/tubewells (second revision) |
| IS 13592 : 2013 Specification for unplasticized polyvinyl chloride (PVC-U) pipes for soil and waste discharge system for inside and outside buildings including ventilation and rainwater system (first revision) |
| IS 14333 : 1996 Specification for high density polyethylene pipes for sewerage |
| IS 14402 : 1996 Specification for GRP pipes, joints and fittings for use for sewerage, industrial waste and water (other than potable) |
| IS 14735 : 1999 Specification for unplasticized polyvinyl chloride (UPVC) injection moulded fittings for soil and waste discharge system for inside and outside buildings including ventilation and rain water system |
| IS 14885 : 2001 Specification for polyethylene pipe for supply of gaseous fuel |
| IS 15328 : 2003 Specification for unplasticized non- pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage system |
| IS 15450 : 2004 Specification for polyethylene/ aluminium/polyethylene composite pressure pipes for hot and cold water supplies |
| IS 15778 : 2007 Specification for chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies |
| IS 15801 : 2008 Specification for polypropylene- random copolymer pipes for hot and cold water supplies 15927 Specification for polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels |
| (Part 1) : 2012 Fittings for sockets using heated tools |
| (Part 2) : 2012 Spigot fittings for butt fusion jointing or socket fusion using heated tools, spigot fittings for use with electro- fusion fittings |
| (Part 3) : 2011 Electro-fusion fittings |
| IS 16098 Specification for structured – wall plastics piping systems for non- pressure drainage and sewerage |
| (Part 1) : 2013 Pipes and fittings with smooth external surface, Type A |
| (Part 2) : 2013 Pipes and fittings with non-smooth external surface, Type B |
| vii) Stoneware Pipes and Fittings |
| IS 651 : 2007 Specification for glazed stoneware pipes and fittings (sixth revision) |
| IS 3006 : 1979 Specification for chemically resistant glazed stoneware pipes and fittings (first revision) |
| viii) Asbestos Cement Pipes |
| Check under the category Composite Matrix Products |
| Concrete Pipes and Pipes lined/coated with |
| Concrete or Mortar |
| check under the category Composite Matrix |
| Products |
| c) Kitchen and Sanitary Appliances |
| IS 771 Specification for glazed fire clay sanitary appliances |
| (Part 1) : 1979 General requirements (second revision) |
| (Part 2) : 1985 Specific requirements of kitchen and laboratory sinks (third revision) |
| (Part 3/Sec 1) : 1979 Specific requirements of urinals, Section 1 Slab urinals (second revision) |
| (Part 3/Sec 2) : 1985 Specific requirements of urinals, Section 2 Stall urinals (third revision) |
| (Part 4) : 1979 Specific requirements of post mortom slabs (second revision) |
| (Part 5) : 1979 Specific requirements of shower trays (second revision) |
| (Part 6) : 1979 Specific requirements of bed-pan sinks (second revision) |
| (Part 7) : 1981 Specific requirements of slop sinks (second revision) |
| IS 772 : 1973 Specification for general requirements of enamelled cast iron sanitary appliances (second revision) |
| IS 774 : 2004 Specification for flushing cisterns for water-closets and urinals (other than plastic cisterns) (fifth revision) |
| IS 2326 : 1987 Specification for automatic flushing cisterns for urinals (second revision) |
| IS 2548 Specification for plastic seats and covers for water-closets |
| (Part 1) : 1996 Thermoset seats and covers (fifth revision) |
| (Part 2) : 1996 Thermoplastic seats and covers (fifth revision) |
| IS 2556 Specification for vitreous sanitary appliances (vitreous china) |
| (Part 1) : 1994 General requirements (third revision) |
| (Part 2) : 2004 Specific requirements of wash-down water-closets (fifth revision) |
| (Part 3) : 2004 Specific requirements of squatting pans (fifth revision) |
| (Part 4) : 2004 Specific requirements of wash basins (fourth revision) |
| (Part 5) : 1994 Specific requirements of laboratory sinks (third revision) |
| (Part 6) : 1995 Specific requirements of urinals and partition plates (fourth revision) |
| (Part 7) : 1995 Specific requirements of accessories for sanitary appliances (third revision) |
| (Part 8) : 2004 Specific requirements of pedestal close coupled wash-down and syphonic water closets (fifth revision) |
| (Part 9) : 2004 Specific requirements of pedestal type bidets (fifth revision) |
| (Part 14): 1995 Specific requirements of integrated squatting pans (first revision) |
| (Part 15) : 2004 Specific requirements of universal water closets (second revision) |
| (Part 16) : 2002 Specific requirements for wash down wall mounted water closets |
| (Part 17) : 2001 Specific requirements for wall mounted bidets |
| IS 6411 : 1985 Specification for gel-coated glass fibre reinforced polyester resin bath tubs (first revision) |
| IS 7231 : 1994 Specification for plastic flushing cisterns for water-closets and urinals (second revision) |
| IS 11246 : 1992 Specification for glass fibre reinforced polyester resins (GRP) squatting pans (first revision) |
| IS 13983 : 1994 Specification for stainless steel sinks for domestic purposes |
| d) Valves and Water Fittings (including Ferrules) |
| IS 778 : 1984 Specification for copper alloy gate, globe, and check valves for water works purposes (fourth revision) |
| IS 781 : 1984 Specification for cast copper alloy screw-down bib taps and stop valves for water services (third revision) |
| IS 1701 : 1960 Specification for mixing valves for ablutionary and domestic purposes |
| IS 1703 : 2000 Specification for water fittings – Copper alloy float valves (horizontal plunger type) (fourth revision) |
| IS 1711 : 1984 Specification for self-closing taps for water supply purposes (second revision) |
| IS 1795 : 1982 Specification for pillar taps for water supply purposes (second revision) |
| IS 2692 : 1989 Specification for ferrules for water services (second revision) |
| IS 3004 : 1979 Specification for plug cocks for water supply purposes (first revision) |
| IS 3042 : 1965 Specification for single faced sluice gates (200 to 1 200 mm size) |
| IS 3950 : 1979 Specification for surface boxes for sluice valves (first revision) |
| IS 4038 : 1986 Specification for foot valves for water works purposes (second revision) |
| IS 4346 : 1982 Specification for washers for use with fittings for water services (first revision) |
| IS 5312 Specification for swing check type reflux (non-return) valves |
| (Part 1) :2004 Single door pattern (second revision) |
| (Part 2) :2013 Multi-door pattern (first revision) |
| IS 8931 : 1993 Specification for cast copper alloy fancy single tap combination tap and stop valves for water services (first revision) |
| IS 9338 : 2013 Specification for cast iron/S.G. iron, cast steel screw-down stop valves for water works purposes (second revision) |
| IS 9739 : 1981 Specification for pressure reducing valves for domestic water supply systems |
| IS 9758 : 1981 Specification for flush valves and fittings for water-closets and urinals |
| IS 9762 : 1994 Specification for polyethylene floats (spherical) for float valves (first revision) |
| IS 9763 : 2000 Specification for plastic bib taps, pillar taps, angle valves, hot and cold water services (second revision) |
| IS 12234 : 1988 Specification for plastic equilibrium float valve for cold water services |
| IS 13049 : 1991 Specification for diaphragm type (plastic body) float operated valves for cold water services |
| IS 13114 : 1991 Specification for forged brass gate, globe and check valves for water works purposes |
| IS 13349 : 1992 Specification for single faced cast iron thimble mounted sluice gates |
| IS 14845 : 2000 Specification for resilient seated cast iron air relief valves for water works purposes |
| IS 14846 : 2000 Specification for sluice valves for water works purposes (50-1 200 mm) |
| e) Water Meters |
| IS 779 : 1994 Specification for water meters (domestic type) (sixth revision) |
| IS 2373 : 1981 Specification for water meters (bulk type) (third revision) |
| IS 6784 : 1996 Method for performance testing of water meters (domestic type) (second revision) |
LIST OF INDIAN CODE BOOKS RELATED SANITARY APPLIANCES AND WATER FITTINGS
July 15, 2019
