| IS 694 : 2010 Polyvinyl chloride insulated unsheathed and sheathed cables/ cords with rigid and flexible conductor for rated voltages up to and including 450/750 V (fourth revision) |
| IS 1554 Specification for PVC insulated (heavy duty) electric cables |
| (Part 1) : 1988 For working voltages up to and including 1 100 volts (third revision) |
| (Part 2) : 1988 For working voltages from 3.3 kV up to and including 11 kV (second revision) |
| IS 3961 Recommended current rating for cables |
| (Part 1) : 1967 Paper-insulated lead-sheathed cables |
| (Part 2) : 1967 PVC-insulated and PVC-sheathed heavy duty cables |
| (Part 3) : 1968 Rubber insulated cables |
| (Part 5) : 1968 PVC insulated light duty cables |
| IS 4289 Specification for flexible cables for lifts and other flexible connections |
| (Part 1) : 1984 Elastomer insulated cables (first revision) |
| (Part 2) : 2000 PVC insulated circular cables |
| IS 7098 Specification for cross-linked polyethylene insulated sheathed cables |
| (Part 1) : 1988 For working voltage up to and including 1 100 V (first revision) |
| (Part 2) : 2011 For working voltages form 3.3 kV up to and including 33 kV (second revision) |
| (Part 3) : 1993 For working voltages from 66 kV upto and including 220 kV |
| IS 8130 : 2013 Specification for conductors for insulated electric cables and flexible cords (second revision) |
| IS 9968 Specification for elastomer-insulated cables |
| (Part 1) : 1988 For working voltages up to and including 1 100 V (first revision) |
| (Part 2) : 2002 For working voltages from 3.3 kV up to and including 33 kV (first revision) |
| IS 10810 Methods of test for cables |
| (Part 0) : 1984 General |
| (Part 1) : 1984 Annealing test for wires used in conductors |
| (Part 2) : 1984 Tensile test for aluminium wires |
| (Part 3) : 1984 Wrapping test for aluminium wires |
| (Part 4) : 1984 Persulphate test of conductor |
| (Part 5) : 1984 Conductor resistance test |
| (Part 6) : 1984 Thickness of thermoplastic and elastomeric insulation and sheath |
| (Part 7) : 1984 Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath |
| (Part 8) : 1984 Breaking strength and elongation at break for impregnated paper insulation |
| (Part 9) : 1984 Tear resistance for paper insulation |
| (Part 10) : 1984 Loss of mass test |
| (Part 11) : 1984 Thermal ageing in air |
| (Part 12) : 1984 Shrinkage test |
| (Part 13) : 1984 Ozone resistance test |
| (Part 14) : 1984 Heat shock test |
| (Part 15) : 1984 Hot deformation test |
| (Part 16) : 1986 Accelerated ageing test by oxygen pressure method |
| (Part 17) : 1986 Tear resistance test for heavy duty sheath |
| (Part 19) : 1984 Bleeding and blooming test |
| (Part 20) : 1984 Cold bend test |
| (Part 21) : 1984 Cold impact test |
| (Part 22) : 1984 Vicat softening point |
| (Part 23) : 1984 Melt-flow index |
| (Part 24) : 1984 Water soluble impurities test of insulating paper |
| (Part 25) : 1984 Conductivity of water extract test of insulating paper |
| (Part 26) : 1984 pH value of water extract test of insulating paper |
| (Part 27) : 1984 Ash content test of insulating paper |
| (Part 28) : 1984 Water absorption test (Electrical) |
| (Part 29) : 1984 Environmental stress cracking test |
| (Part 30) : 1984 Hot set test |
| (Part 31) : 1984 Oil resistance test |
| (Part 32) : 1984 Carbon content test for polyethylene |
| (Part 33) : 1984 Water absorption test (Gravimetric) |
| (Part 34) : 1984 Measurement of thickness of metallic sheath |
| (Part 35) : 1984 Determination of tin in lead alloy for sheathing |
| (Part 36) : 1984 Dimensions of armouring material |
| (Part 37) : 1984 Tensile strength and elongation at break of armouring materials |
| (Part 38) : 1984 Torsion test on galvanized steel wires for armouring |
| (Part 39) : 1984 Winding test on galvanized steel strips for armouring |
| (Part 40) : 1984 Uniformity of zinc coating on steel armour |
| (Part 41) : 1984 Mass of zinc coating on steel armour |
| (Part 42) : 1984 Resistivity test of armour wires and strips and conductance test of armour (wires/strips) |
| (Part 43) : 1984 Insulation resistance |
| (Part 44) : 1984 Spark test |
| (Part 45) : 1984 High voltage test |
| (Part 46) : 1984 Partial discharge test |
| (Part 47) : 1984 Impulse test |
| (Part 48) : 1984 Dielectric power factor test |
| (Part 49) : 1984 Heating cycle test |
| (Part 50) : 1984 Bending test |
| (Part 51) : 1984 Dripping test |
| (Part 52) : 1984 Drainage test |
| (Part 53) : 1984 Flammability test |
| (Part 54) : 1984 Static flexibility test |
| (Part 55) : 1986 Abrasion test |
| (Part 56) : 1987 Accelerated ageing by the air- pressure method |
| (Part 57) : 1987 Flexing test (Part 58) : 1998 Oxygen index test |
| (Part 59) : 1988 Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables |
| (Part 60) : 1988 Thermal stability of PVC insulation and sheath |
| (Part 61) : 1988 Flame retardant test |
| (Part 62) : 1993 Fire resistance test for bunched cables |
| (Part 63) : 1993 Smoke density of electric cables under fire conditions |
| (Part 64) : 2003 Measurement of temperature index |
| IS 12943 : 1990 Brass glands for PVC cables |
LIST OF INDIAN CODE BOOKS FOR CONDUCTORS AND CABLES
July 15, 2019
